250 Royalty-Free Audio Tracks for "Low To High"

Track was created using audacity®. The track was a generated chirp of 1 sec. Repeated once and then reversed. The gverb filter was used with a low early reflection and high room size value. And then the echo filter with 0. 2 delay time of seconds and decay factor of 0. 5 seconds was applied.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Pieza compuesta por dos sonidos, uno agudo y uno grave, en el cual el primero marca el pulso y el segundo la clave. Piece made with two sounds, one high and one low. The first one marks the pulse and the second one the compasses.

Bowed cymbal swellsrare 18" zildjian eak crash rideviolin bowrecorded in 24 bit at 48khz with an mxl 603 mic through yamaha mg16xu mixer and motu audio express a/d in reason 6 with subtle modulation and filtering. Clips are cut from track with no fade-in/out. July 21st 2015 high noon in nyc during very hot-feeling 88º with high low-level ozone and abusive humidity of 74%.

Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

For this sound i used 4 differents kind of tonality :261,6 hz293,7 hz329,6 hz349,2 hzand then i used the effect low and high and i put an higher pitched sound to make a sound more like videogames style. This sound have a joyful purpose like when you finish a stage in a game.

Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recording of sea undertow on the beach of formicoli, vibo valentia, calabria, italy, the 19th agust 2022 16:44. The sound was recorder with a zoom h1n with windshield at a short distance from the crashing of the waves on the beach. The waves are driven by a light, gentle wind. The sound was recorded by holding the microphone in my hand while i dived knee-deep into the water and walk, filming the crashing of the waves (also on my legs). High-frequency sound details (the foam of the sea, the impact of waves on each other, etc. ) are much more audible here. Processing:* volume adjustment;* 120hz high pass filter (to reduce low some low frequencies rumble due to the wind);* cut and crossfade to eliminate very few mechanical noise of my hand on the mic;.

Field recording of a summer afternoon (28th june, ~20:30) in berlin lichtenberg. The recorder (edirol r-09rh) was set in a very high building, therefore the sound consists mainly of ambient noise, eventually with subtle concrete sounds (birds, childs, dogs, sirens,. . . ). The audio is unfiltered, so it's dominated by low-frequency energy. Filter as you wish :). (the web preview seems to have some high frequency artifacts. Download the wav file to get it on full quality).

Some sweepish sounds. Synthesized with "vacuum pro" vsti from air, the patch was a unmodified "500msvph"added effects with a "tassman 4" vst filterbank, multiple low pass filter with some oscillation. Echo was enable in a part of this whole creation.

Basically layered a 200hz snare body, similar to a 909, low-passed and saturated. Added in a transient sound, then a certain impact sound that you wouldn't expect, layered together with some high end white noise, compressed, then used a transient shaper for that final touch.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recording of my cat purring while laying down. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else.

Custom synthesized heavy dance kick 1 with little high end. License: cc 0. .

Very bass harmonics for kick (to be played in parallel) and at lower volume for snare and tom bass harmonics. It was created by filtering a 60 hz sine wave (remove all the high frequencies but also the extreme low).

For this sound i used 4 differents kind of tonality :440 hz392 hz349,2 hz329,6 hzand then i used the effect low and high and i put an higher pitched sound to make a sound more like videogames style, just like my other sound named stagecleared. This sound have a sad purpose like when lose at a game.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Sounds a bit like your radio. . . Made using audacity, the tone was given various effects to make it was it is now. Somewhat not the best, but it's something i created in 5 minutes. So it shows what little, or much you can do. . . You decide. -- use this sound under the creative commons 0 licence (whoo-hoo) --.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This was produced by tapping on a stethoscope which had an earbud pressed against a shure sm57 mic. Low pass filter applied, as well as compression and a gate. Chorus added. Used a recording cassette deck as a preamp going into an m-audio audiophile usb soundcard. Note: if you're having problems listening to this clip, the cutoff frequency of your speaker set may be too high(solution: new speakers). The signal strength exists almost entirely in the very low frequencies, so you may need a sub-woofer to hear it. Otherwise, try turning your speaker volume all the way up. Doing so may saturate the signal and at least allow you to hear the harmonics of the signal caused by the distortion. I don't recommend it, but you'll at least maybe be able to hear something.

Night: high winds with gusts. Record inside a wooden shed, 12 ft by 30 ft. Low roar of wind outside with louder, higher velocity gusts. Creaking of wood structure, bang of object on wall. Recorded with oss (jecklin disk) system using two josephson c617 mics with microtech-gefell mk221 capsules.

Glissando on a harp from low to high for 6 seconds. To be used in a quiz if, for example, a correct answer has been given to a question. But the sound can also be used for other parts: as a result of a wizard, witch or fairy. Good luck with it.

A short clip of a wooden door opening, first a high pitch creak, then a low pitch as it's movement slows. Recorded at close proximity with a sennheiser 416 microphone, to a sound devices 552, in a residential, fully attached house, with minimal noise and background but natural ambience and reflection, from a large (bed)room.

As usual. . A triple osc was used. I played with the different possibilities. . . Sine, triangle, saw, square waves were used here. It may cause damage on high volume (maybe?). Effects: phaser, reverb. After recording, the entire soundshape was inverted.

Here's one from a series of 'clang' sounds, great for impact moments in trailers & commercials, or to layer up with other sounds. They are somewhat high-pitch, so they might mix well with low frequency drums and impact sounds. Recorded with tascam dr-40 built-in-mics, by hitting a railing with a pipe in a stairwell and adding a little bit more reverb in daw.

Recording of my finger snap inside my living room. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This is the stereo file of the 4-ch thunder-file--> https://freesound. Org/s/367222/. The thunder is slow downed to 0,7speed and has now very deep frequencies, which can shake your house, if you have the right equipment to play the file. ;-)the 4 channels are recorded in irt-cross technique so it is a 360° record. Ch1(left) = fl+rlch2(right) = fr+rr. _________________________________________________________________used recording gear:zoom f84 x rode nt1 (without "a" = the black ones).

Recording of an electric kettle boiling water in the kitchen counter of my apartment. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else.

A short parade of ferraris on their way up lymington high street. The street is lined with people chatting and cheering at the cars, which beep their horns and rev their engines. Zoom h1 with roland cs-em10 in ear mics. Seems a bit heavy on the low frequencies, but i've left it as-is.

Some wind was blowing through some wooden blinds in my house and making this obnoxious howling sound, so i captured some of it :p. Recorded with a rode nt1.

Just tapping things around my desk with a screwdriver and jingling the loose change inside a glass jar. I had the mind to use all of the sounds in this file for a kick/snare/hi hat drum rack in ableton live - hence the ranges of frequency from low (jar thumps) to textured highs (loose change) and high (taps. ) i hope these come in handy, please enjoy! - vanszi. Bandcamp - https://www. Vnzi. Bandcamp. Comspotify - https://open. Spotify. Com/artist/0mzsotvcahcvlcqwo9qndgsoundcloud - https://www. Soundcloud. Com/vanszi.

Recording of city ambience from my apartment window at night. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else.

Left the lid of my top loading freezer open, you can hear the hum of the motor and also the crackle of inside the freezer. Messing around with a low or high pass filter can give a nice background white noise. Free for commercial and non commercial use as apart of a creative piece of work. Recorded with the zoom f4 and rode m5s.

Recording of a cardboard being finger scratched. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

In the range of three octaves, sung by me in 13 tracks. Not completely in tune. The first one is unedited sound. The second is transposed an octave lower. The third is transposed two octaves lower. In the fourth all the latter are sounded together (39 voices). The transposing makes a peculiar effect to the voice specially in the second (12 semitone) transposition.

A kick drum produced for moody trance project. Production process: sound generated from kick synth; signal splitted in two bands; high band signal filtered, distorted and panned (this gives nice roughness and makes kick sound pretty good with center panned bassline); low band signal equalized with some re-verb; both bands mixed back together.

Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This is a fragment from the aria ah mes amis at a lower pitch and badly performed. Iintend to use it for a coursera homework (audio signal processing for music applications). The intention is to transpose it and simulate a morfing like a falseto to the true key where the tenor hits high c, which i obviously cannot hit, otherwise i wouldn't be taking coursera courses and uploading to freesound. . .

Lazer sound. I made this lazer sound with the use of operator in ableton as well as adding a few effects to help round it out. I started with a basic sine wave and then began to adjust the frequency range to cut out some of the low end of the sound and enhance the high end to make it more realistic and movie accurate. I also had to shorten the decay time so it is more of a short zap sound than a prolonged note. Another step was giving it an initial high pitched sound and this was achieved by having the sound start higher up the scale with semitones and then dropping down giving the effect of shooting and something traveling from the source sound.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Wind turbine sound, near lacedonia, campania, italy, the 16th august 2022 @ 18:30the sound was recorder with a zoom h1n with windshield from a distance of 25m approx from the wind turbine. Processing:* 120hz high pass filter (to reduce some low frequency rumbles due to the wind);* volume adjustment;. Other sound in the recording:* voice of a woman in the distance (at the beginning of the file);* wind gusts;* car passing by (at the end of the file);.

It was quite windy and the rain hit the windows really hard. The wind tinkled the lamp. I recorded this sound by positioning a rode nt1 a few decimeters away from the lamp. You can hear some talking in the background. Recommended audio edit: low cut at 30 hz and soft high cut (6db/oct)starting at 1. 5khz.

Recording of a button sound from a vintage teac hi-fi stereo amplifier. Recorded and processed at 24bit 96khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

In this sample you hear a recording from inside a well sound insulated room, directly under the roof of a house. Strong rain hints the roof and produces low frequency muted sounds. In the background you hear the constant noise of the rain, coming through the window. There are also a few raindrops hitting the glass of the window. The sample was recorded using the built-in stereo microphone of a zoom h4n recorder. It was slightly processed to remove unwanted low and high frequencies which were not related to the actual recording. If you use this sound, please add a comment or send a private message what you created using it. :-).